Monday, June 29, 2009

Rachel's Hoof Blog Confidential: Hind Hooves of the Hottest Filly in the USA

by Fran Jurga | 29 June 2009 | Fran Jurga's Hoof Blog

The jock in the shower: Preakness Stakes winner Rachel Alexandra enjoyed a bath after her 19-length romp in Saturday's Mother Goose Stakes at New York's Belmont Park. She set a new stakes record, in spite of being eased to a rolling canter by rider Calvin Borel at the finish.

Photographer Sarah K. Andrew (Rock and Racehorses) followed the filly back to the barn and waited patiently for Rachel to do a little dance so you could clearly see at least one of the four fleet feet on this filly.

As far as I know, Rachel is still being shod by David Hinton from Oklahoma.

Rachel has now moved to the Asmussen training camp at Saratoga Springs, where the rest of the racing world will join her in a few weeks.

Hoofcare & Lameness and The Hoof Blog will be there, too. Join me on Tueday nights at The Parting for speakers and social time, and plan to be at our special Hoofcare & Lameness night at the National Museum of Racing and Hall of Fame on Tuesday, August 4, where we will celebrate the addition of lots more horseshoes and hoof paraphernalia to the RideOn! exhibit on horse health.

Horseshoes from the Rood and Riddle Podiatry Clinic are prominently featured in the new exhibit, along with hoof boots from Castle Plastics and Hoofeez from New Zealand, another handmade shoe by Cornell vet school's Michael Wildenstein, the new hoof pads from Vibram, a Plastinate hoof model from HC Biovision (formerly featured just in photos) and much more. Watch for speaker and sponsor announcements!

Did I just say that Rachel Alexandra was the hottest filly in the USA? Make that the hottest racehorse, period, in the USA, although I would still give equal time to her older rival, Zenyatta. The buzz surrounding these two horses is enlivening a racing scene that had been written off by the doom-and-gloom set a few months ago.

Follow the Hoof Blog's Fran Jurga on Twitter: www.twitter.com/franjurga




© Fran Jurga and Hoofcare Publishing. No use without permission. You only need to ask.

Fran Jurga's Hoof Blog is a between-issues news service for subscribers to Hoofcare and Lameness Journal. This blog may be read online at the blog page, checked via RSS feed, or received via a digest-type email (requires signup in box at top right of blog page).

To subscribe to Hoofcare and Lameness (the journal), please visit the main site, www.hoofcare.com, where many educational products and media related to equine lameness and hoof science can be found.

Questions or problems with this blog? Send email to blog@hoofcare.com.

Tuesday, June 23, 2009

Ireland's Fine Horses Once Passed Through This Arch

County Carlow in Ireland is home to this skeleton of a once proud forge. Double-click on the image for a larger view. Photo kindly loaned by Paddy Martin.

Throughout the lifetime of this blog, I have periodically shared evidence of a few special remaining buildings that are scattered around the globe. These buildings are usually in the British Isles. They are special in that they employ the simplest and most elegant form in nature, the arch, to emulate a horseshoe as the supporting doorway of a smithy or shoeing forge.

True to form, as soon as you publish one, another one pops up. Or, in today's case, two pop up.

We have Paddy Martin from Ireland to thank for these, and I do thank him heartily.

The top photo is my favorite. The arch of the old forge may soon be all that is left. It was definitely the strongest form. Notice there is also an arch in the fence gate. And even the ivy on the cottage is attempting to imitate the form of an arch. This must be a magical place.

I can't help but notice that the scale of this arch is more powerful than many of the horseshoe doorways seen in other smithies from days gone by. You could drive a truck through there, or a loaded wagon. Surely either this farrier was a proud man, or a prosperous one, or both, and that must have meant that the horses in the area enjoyed visiting a fine smithy, back in the day.

But why hasn't it been preserved? There's certainly something beautiful in the neglectful state, but how long before it crumbles?

Paddy writes, "I'm now 60 years old and the first time that I saw this old forge was when I was walking or 'driving' cattle from a farm near Castledermot to another farm near Rathvilly in County Carlow...a distance of about seven miles. I was helping my father and I must have been about 10 at the time. I seem to remember the name Cummins or Cummings being associated with this old forge. At about 18 I moved away from the area and I have only become reacquainted since my daughter moved into a house two minutes away a couple of years ago.

"The forge is located at Corballis Cross Roads which is on the 'back road' from Castledermot to Baltinglass through Crop Hill in South Kildare. The building itself seems not to be past restoration...must have a closer look when I'm there again."


Note to Paddy: Find out if it is for sale....





And this slightly different rendition on the arched doorway is in County Kildare. Photo kindly loaned by Paddy Martin.

Paddy's second forge photo is one that I believe I have seen pictured before; he says it is on the road from Kildare Town to Rathangan in County Kildare. It is very similar to others found in Ireland but it doesn't have the single window above the keystone--or maybe it did and it has been bricked over.

I need to make some sort of a Google Map with all these great old forges marked on it so someone (maybe even me, someday) could go on tour and visit them all. We could have some sort of a smithy architecture road rally up and down the British Isles. In order to win you'd have to have a picture of yourself in front of each forge. That's the sort of farrier competition I might be able to win.

When Art and Craft Combined in One Tool: Steve Teichman's Hoof Nippers

by Fran Jurga | 23 June 2009 | Fran Jurga's Hoof Blog

Back in the depths of winter, I was at the American Farrier's Association Convention in Tennessee. The annual fundraising auction there is a special treat because it is a collection of work by farriers, for the most part, or by artists who have painted or sculpted farriers or hooves or horses. From the tiniest, most delicate ring to a huge, rough-hewn coffee table or a towering wine rack, each treasure is one of a kind and somehow bears the indelible stamp of farrierism on it. Unmistakably. Undeniably. The prices that these items usually bring are as impressive as the workmanship.

This year, I was knocked out the most by this pair of GE nippers. Yes, this is a standard out-of-the-pouch pair of GE nippers. But they have been transformed by farrier Steve Teichman of Pennsylvania, who is also a master at artistic engraving. Steve's work is subtle and very fine, and the fact that he would choose to engrave a tool that has reins that are edged in different ways is testimony to his confidence in his art. Surely these are the nippers that would have manicured the hoof walls of the horses in some fantasy kingdom faraway. They looked enchanted.

What are nippers?
For those readers who are not in or around the farrier world, nippers are sort of long-handled toe-nail clippers for horses. The three main cutting tools used in trimming horses are the nippers for the wall, the sole knife, and the rasp for flattening the foot and dressing the wall. Nippers come first and there's no going back if you nip too much. They are used to clip the edge of the hoof wall and come in different lengths, and there are racetrack nippers and saddlehorse nippers. The cutting edges of the blades, where they meet, are very sharp, so that a farrier can nip accurately and get a clean cut on a hard, dry hoof wall as well as a soggy, soft one. Farriers take very good care of all their tools, but are especially careful of their nippers. The nippers in this photo are made from a high grade of steel by the GE Forge and Tool Company of Arroyo Grande, California. I've always wondered when riveted or hinged nippers first came into use and where. Does anyone know?

I admired Steve's nippers all week but when the auction started, they were one of the first items to go. The room was only half full and they sold for far less than their real value, many of us thought. I was crushed, and glad Steve wasn't there. The buyer got a real bargain. And he knew it, too.

As much time as Steve spent engraving the nippers, I think I have spent trying to get a good Photoshop image of them. My friends Liz and Garnet Oetjens took great photos, but they always look different on the computer screen and I've been afraid to post a photo because I want to do Steve's work justice. But enough time has passed: suffice to say, the dark areas are just shadows, not any artifact of the engraving or manufacturing the nippers.

The next AFA auction will be at their 2010 convention in Portland, Oregon February 24-27. I'm sure all the artists are busy working on their masterpieces now. Enchantments are underway in studios, forges, basements, garages and through camera lens across the USA. I'll be amazed, all over again.

© Fran Jurga and Hoofcare Publishing. No use without permission. You only need to ask.

Fran Jurga's Hoof Blog is a between-issues news service for subscribers to Hoofcare and Lameness Journal. This blog may be read online at the blog page, checked via RSS feed, or received via a digest-type email (requires signup in box at top right of blog page).

To subscribe to Hoofcare and Lameness (the journal), please visit the main site, www.hoofcare.com, where many educational products and media related to equine lameness and hoof science can be found.

Questions or problems with this blog? Send email to blog@hoofcare.com.

Sunday, June 21, 2009

Father's Day Video Treat: Buster Keaton in "The Blacksmith"




"Under the scrawny palm tree,
 the village smithy stands..."

It may have been made in 1922, but it will still make you laugh. One of the world's all-time great film stars and comedians didn't need a voice. You don't need to hear his hammer strike or his fire hiss or the horse's hoof hit the smithy floor. He's so good, he makes you hear it.

Settle down for 20 minutes and watch a bit of film history. And if you're a father, happy father's day.

Old car buffs will like the vintage Rolls Royce in this film! I like the rolling ladder, not to mention all the wooden boxes of horseshoes. I liked the display of sample horseshoes too; it looked like he had a sample of a rope shoe or pad, used to prevent slipping on pavement.


Don't you wonder how they set this up for filming and where they found the props? Or did they just remove one wall of an existing shoeing shop somewhere outside Los Angeles?

Keaton was the director as well as the star of this film. I wish I knew more about how and why and where he made this little gem of a film. The video is hosted from archive.org, and we appreciate their help in making it possible to share it with you.

Update: In 2013, a new cut of this film was unearthed, so there are now two versions of this film, with different scenes. This one is the original, longstanding version but wouldn't you love to watch them both!

Thanks to Susanna Forrest, author of If Wishes Were Horses, for assistance with this article.

Here's one of my favorite-ever covers of Hoofcare & Lameness Journal, perfect for Fathers Day! If you double-click on the image, you should be able to see it in a larger size.

© Fran Jurga and Hoofcare Publishing. No use without permission. You only need to ask.

Fran Jurga's Hoof Blog is a between-issues news service for subscribers to Hoofcare and Lameness Journal. This blog may be read online at the blog page, checked via RSS feed, or received via a digest-type email (requires signup in box at top right of blog page).

To subscribe to Hoofcare and Lameness (the journal), please visit the main site, www.hoofcare.com, where many educational products and media related to equine lameness and hoof science can be found.

Wednesday, June 17, 2009

Tim Flach's EQUUS: What Image Defines the Horse for You?





© Fran Jurga and Hoofcare Publishing. No use without permission. All images and text protected to full extent of law. Permissions for use in other media or elsewhere on the web can be easily arranged.

Fran Jurga's Hoof Blog is a between-issues news service for subscribers to Hoofcare and Lameness Journal. This blog may be read online or received via a daily email through an automated delivery service.

To subscribe to Hoofcare and Lameness, please visit our main site, www.hoofcare.com, where many educational products and media related to equine lameness and hoof science can be found.

Questions or problems with this blog? Send email to blog@hoofcare.com.

Comments to individual posts are welcome; please click on the comment icon at the bottom of the post.

A Foal Meets His First Rasp


Foal_2009_0038, originally uploaded by Equest Images.

"Hey, Mom, what's that thing?"

Photographer Nadja Fischer captured this rite of passage at the Oswood Stallion Station in Weatherford, Texas recently. The shiny tool box on wheels is old hat to the mare, but the foal is curious, and will probably soon feel the cool cut of the rasp's teeth on the soft hoof wall.

Nadja Fischer is a bilingual German/English photographer just launching her career with a promising portfolio of images. We wish her luck as, just like this foal, she learns her way around the business and rises, hopefully, to the top through the proven combination of hard work and talent.

Weatherford, Texas is one of the cutting horse industry's central points for breeding and training farms, and also home to several major equine hospitals.

Thanks, Nadja, and good luck to foal #38!